Additional Information; Correcting The Date And Time; (Lite Touch Zoom 130Ed Qd Only) - Nikon Lite Touch Zoom 130ED Bedienungsanleitung

Correcting the date and time

(Lite Touch Zoom 130ED QD only)

MODE/SEL button
ADJ button
Press and hold the MODE/SEL button for more
1
than 2 seconds.
When the date/time display format is Year/Month/Day, Month/Day/Year,
or Day/Month/Year, "Year" indicator blinks first. For Day/Hour/Minute
display, "Hour" indicator blinks first.
The date/time correction can be performed with the camera either on or
off. When the camera is on, the data will be immediately registered if the
slide cover is closed, or the Mid-roll Rewind button or a Zoom button is
pressed while the setting is in progress.
2 Press the ADJ button to set the blinking digit.
Each time you press the ADJ button, the number advances by one.
Holding the ADJ button pressed for more than 2 seconds advances the
number quickly.
3 When the blinking indicator is correctly set,
press the MODE/SEL button again so that the
next indicator blinks.
Repeat steps 2 and 3 to set all the digits. When the year/month/date or
date/hour/minute have been adjusted, press the MODE/SEL button to
finish the adjustment procedure. If the year/month/date or date/hour/
minute are all displayed correctly, adjustments has been completed.
When the battery is replaced
aThe LCD panel shows "
aThe date/time is not imprinted in pictures taken while "
indicated. Set the date and time following the above procedure.
."

Additional Information

E
" is
41