Kemper kHS Montage- Und Bedienungsanleitung Seite 67

Configuration of the B Valve
Device selection
OK
When using A/B valve technology, always make sure that the B valve is
configured first. A valves can then be assigned to the B valve.
The assignment of the A valves is shown in the following. For information
on valve technology, please see Chapter 10.1.
Configuration of the A Valve
Device selection
OK
OK

see Miscellaneous settings
You are recommended not to link more than 5 A valves to one B valve.
© www.kemper-olpe.de – 03.2020 / K410068602008-00 – 67 / 136

Valve

see Miscellaneous settings

Control type
OK
OK
Control type
OK
B-Valve
OK
OK
OK
OK