KHS temperature measurement valve
(Fig. 628)
rt
ws
KHS temperature measurement valve
(Fig. 628)
[22] wh (WH)
[23] bn (BN)
wh
bn
In the as-delivered state, a cable
bridge is plugged between Ter-
minals 22 and 23. This must be
removed before connecting the
KHS water sensor.
© www.kemper-olpe.de – 03.2020 / K410068602008-00 – 55 / 136
KHS Free Drain (Fig. 688 00)
[18] rt (RD)
[19] rt (RD)
[20] ws (WH)
[21] ws (WH)
ws
KHS Free Drain (Fig. 688 00)
[22] ws (WH)
[23] br (BN)
br
In the as-delivered state, a cable
bridge is plugged between Termi-
nals 22 and 23.
This must be removed before
connecting the KHS Free Drain.
[24] 230V (2A) / 24V
[25] OUT (fault)
[26] OUT (operation)
Warning lamp
Signal horn
230V (2A)
24V
BMS
Monitoring example: Faults
and mains voltage failures are
reported with external voltage to
the network warning lamp, the
warning horn or to the BMS.