Kemper kHS Montage- Und Bedienungsanleitung Seite 59

2.3.4
CAN bus cable connection
MASTER
2.3.5
Terminal resistor
The 120 Ω terminal resistor may only be installed in the last control component of a
CAN bus cable. The MASTER does not require a terminal resistor.
2.3.6
Connection of terminal resistor
120 Ω
© www.kemper-olpe.de – 03.2020 / K410068602008-00 – 59 / 136
Device 1
All SLAVE system controls and all CANBus-
capable hygiene flushing boxes are
supplied with a 120 Ω end resistor.
For non-terminal SLAVE or hygiene
flushing box system controls, the
resistor must be removed!
Device 2
KHS Flush
Box PRO