Cisco 300-Serie Kurzanleitung Seite 7

S 3
TEP
S 4
TEP
S 5
TEP
C
AUTION
You are now ready to configure the switch. Refer to the
Business Managed Switch Administration Guide
Next Steps
These tasks can be accomplished by using the procedures in the Cisco
Small Business Managed Switch Administration Guide.
7
Downloaded from www.Manualslib.com
Configure the utility with the following parameters:
• 115200 bits per second
• 8 data bits
• no parity
• 1 stop bit
• no flow control
Enter a user name and password. User names and passwords are
both case sensitive and alpha-numeric. The default username is
cisco, and the default password is cisco.
If this is the first time that you have logged on with the default
username and password, the
Select Edit, enter a new administrator password and then select
Execute.
Make sure that any configuration changes made are saved
before exiting.
• If you are not using DHCP on your network, set the connection
type on the managed switch to Static and change the static IP
address and subnet mask to match your network topology.
• Save your settings
• Return your computer to its original settings
manuals search engine
Change User Password Page
Cisco Small
for further information.
300 Series Managed Switches
opens.