Cisco 300-Serie Kurzanleitung Seite 6

S
TEP
S
TEP
S
TEP
S
TEP
C
AUTION
The Getting Started window displays. You are now ready to configure the
switch. Refer to the
Guide
Use the console port
To configure the managed switch:
S
TEP
S
TEP
300 Series Managed Switches
Downloaded from www.Manualslib.com
and the computer. You may need to disconnect and reconnect
the devices for them to discover their new IP addresses from
the DHCP server.
Details on how to change the IP address on your computer
N
OTE
depend upon the type of architecture and operating system you are
using. Use your computers local Help and Support functionality and
search for "IP Addressing".
Open a Web browser window. If you are prompted to install an
4
Active-X plug-in when connecting to the device, follow the
prompts to accept the plug-in.
Enter the switch IP address in the address bar and press Enter. For
5
example, http://192.168.1.254.
The Managed Switch Login Page displays.
Enter the default login information:
6
Username is cisco
Default password is cisco (passwords are case sensitive)
If this is the first time that you have logged on with the default
7
username and password, the
a new administrator password and then click Apply.
Make sure that any configuration changes made are saved
before exiting from the web-based interface by clicking on
the Save icon. Exiting before you save your configuration will
result in all changes being lost.
Cisco Small Business Managed Switch Administration
for further information.
Connect a computer to the switch console port using the provided
1
console port cable.
Start a console port utility such as HyperTerminal on the computer.
2
manuals search engine
Change Password Page
opens. Enter
6