Paper Handling
Paper Handling Configuration
3860/80 Quick Reference Guide
Downloaded from
www.Manualslib.com
Instead of using the UP ARROW key to adjust the same amount of offset
each time a particular form is loaded, that offset can be stored in a
parameter called top print reference and saved to a Format. If a top print
reference is saved, paper will advance to the right place each time that
paper path is loaded. See "Set a Top Print Reference", in Chapter 8 of
the 3860/80 User's Manual.
Use the bottom paper path for thick, or heavy, hard-to-feed forms or for
printing labels. Use the rear path for forms that are easiest to feed.
Pedestals, racks, and baskets shown below are available from the printer
representative or supplier, or check GENICOM's website:
www.genicom.com.
Fully Attended
Semi-Attended
Paper
Rack
Paper Handling Configurations
manuals search engine
Moves paper down by 1/72 inch per click. Do not move
paper down so far as to allow printing on the striker bar.
Tear Off
Every One
or Two
Sheets
Unattended
Paper
Basket
Tear Off
Every
One or
Two
Sheets
Paper
Rack
Paper
Shelf
Pedestal
27