Selecting The Display Language - TallyGenicom 3860 Schnellreferenzhandbuch

Format
.
Menu
Enter

Selecting the Display Language

The ON LINE light must be
out
Menu
Enter
9
Menu
Enter
9
When the desired language
is displayed ...
Menu
Enter
Clear
First
Menu
Enter
3860/80 Quick Reference Guide
Downloaded from www.Manualslib.com
Selects a format. Read about Formats in the User's Manual before
pressing this key. This can inadvertently overwrite current parameters
such as margins, font, LPI, CPI, tabs, form length, and so forth.
Functions as the "decimal point" in menu entry mode.
When Online, steps the LCD through current settings for font, CPI, LPI,
path, interface, and emulation. When Offline, enters the LCD menu.
Functions as the "Enter" key in the menu mode.
If not, press the ON LINE key.
Press the MENU key to enter the LCD Menu.
Press and release the DOWN ARROW key until the LCD says PROG:
Msg Lang.
Press ENTER. This means, "Yes, this is the desired function."
Press and release the DOWN ARROW key until the desired display
language is accessed. The list is circular; keep pressing the arrow key
to cycle through the list.
Press ENTER to make that selection. The selection will flash three
times to show that it was saved.
Press FIRST to go back to the top of the LCD menu.
Press ENTER to confirm existing the LCD menu.
manuals search engine
15