THOMSON ROC250 Bedienungsanleitung Seite 4

ROC 250 GB
Downloaded from www.Manualslib.com
18/07/02 11:54
This Universal Remote Control is compatible with most models of infrared-controlled TV sets,
video recorders, LVD players, satellite and cable TV receivers.
This remote control was programmed in the factory, so that you can use it to control most of
the sets of the THOMSON group's make. For this reason, we recommend that prior to
attempting to programme the remote control, you try it out by means of one of the methods
described in this user manual. However, first of all, you must install 2 batteries (AAA, not
supplied) in the remote control.
Please keep this guide along with the code list (provided separately), so that you can
subsequently programme your remote control for use with other sets.
1 - Description of the key functions
1
Horizontal scrolling keys (any menu).
2
Validate your choice in any menu.
3
Display of main menus for remote controlled equipment.
4
Indicator lamp: the red indicator lamp lights up when any key is pressed.
5
Program zapping button (rapid select).
6
Channel select and input of numerical data.
7
Programming the remote control.
8
Programming of a
S how V iew
9
G (rewind): wind back or forward (
10
M (record).
Depending on equipment and manufacturer, push once or twice on this button to record.
11
B (play): play a tape (
VCR
12
Colored keys: control of videotext or special equipment functions.
13
Start/Stop videotext (except for Thomson group equipment).
14
Videotext inlay on TV picture (except for Thomson group equipment).
15
"Info" key.
16
Choice of equipment to operate by remote control (
programme and control all kinds of sets such as TVs, satellite receivers, video recorders, DVD players
and so on).
17
Vertical scrolling keys (any menu).
18
On/Standby ( B B ).
19
Quitting a menu.
20
Adjustment of volume.
21
Select an external source (Audio/Video connector).
22
Adjustment of volume.
23
F (fast forward) : for
VCR
24
K : stop-on-image, suspend play.
25
Stop tape advance, or play mode of a
VCR
26
Videotext outlet (except for Thomson group equipment).
27
Stop page scrolling (videotext) (except for Thomson group equipment).
28
Press this key first, before you type in the 2-digit channel number
(except for Thomson group equipment).
2 - Testing the not yet programmed remote control
1. Switch on the set you want to control.
2. Press the key (16) that corresponds to the type of equipment you want to control:
TV: television set MODE+: other set
3. Direct the remote control towards the TV set and try to switch it off by simply
pressing the key B B (18).
Should the set not switch off, you'll have to programme the remote control by
means of one of the methods A, B, C or D described hereinafter in chapter 3.
manuals search engine
Page 1
or + recording (see equipment manuals).
VIDEOPLUS
s and s).
VCR DVD
), audio disk or disk.
CD DVD
, +). The
TV MODE
s and s.
DVD
(disk).
DVD
1
+ key allows you to
MODE