Operation - Ventus W177 Bedienungsanleitung

them.
8. Installing additional remote thermo-hygrometer sensor(s)
Additional remote thermo-hygrometer sensors can be purchased separately (not supplied in the
package).
1. Select a location for the remote thermo-hygrometer that is within the effective transmission range of
20 meters. Shorten the distance if obstacle is between the monitor & remote sensor.
2. Use a small screwdriver to loosen the screws on the battery door of the remote sensor. Insert 2
pieces of AAA batteries according to the polarity indicated.
3. Assign channel 2 or 3 to the remote sensor by setting the slide switch inside the battery
compartment. (Channel 1 is used by the anemometer and should not be assigned to the new
remote thermo-hygrometer)
4. Press "Tx" button inside the battery compartment of the remote sensor to transmit temperature &
humidity data to the monitor. Then close the battery door and tighten the screws.
5. Hold "CHANNEL/SEARCH" button on the monitor to search for all remote sensors. The
temperature & humidity readings of your selected channel number will be displayed on the monitor
if RF transmission is successful.

OPERATION

Name and Functions of Buttons:
RAIN/CLEAR
RAIN HISTORY
WIND
WIND ALARM
PRESSURE
CHANNEL/
SEARCH
MEMORY
Press Functions
Read daily/monthly/weekly/total rainfall
Read current & past 6 days, weeks or months rainfall data
Read average & gust wind speed
Read high gust wind alarm and low wind
chill alarm
Toggle pressure unit hPa, inHg & mb
Select indoor, Channel 1, 2, 3 or
auto scroll
Read maximum/minimum records
Hold 3 seconds
Clear rainfall record
Enter high wind speed alarm & low
wind chill alarm setting
Sea level pressure setting
Search for all remote sensors
Clear memory record
6