Operation - Ventus W137-R Bedienungsanleitung

the rain gauge (as it rest on the mounting surface) is horizontally level.
- Use a pencil to trace the inside of the mounting holes on the base of the rain gauge to mark the
screw locations.
- Drill a hole in the center of each marked location and insert the supplied plastic screw plugs
Hold the rain gauge against the mounting surface so the holes on the base are aligned with the
-
plugs, then thread the supplied washer head screws into each hole and use a screwdriver to
tighten them.

OPERATION

Name and Functions of Buttons:
Press Functions
MODE/UNIT/- Select weekly/monthly/total rainfall
1 step backward in clock setting
CLEAR/+ Clear the current rainfall record
1 step forward in clock setting
SET
DAILY, WEEKLY, MONTHLY & ACCUMLATED RAINFALL
Daily rainfall reading located on the second line of the display
Weekly, monthly & total rainfall readings located on the top line of the display. Press "MODE/UNIT/-"
repeatedly to switch between the different modes
Weekly rainfall mode when "WEEK" icon appears
-
- Monthly rainfall mode when "MONTH" icon appears
Total rainfall mode when "WEEK" & "MONTH" icons disappear
-
In weekly, monthly or total rainfall display, press "CLEAR/+" to clear daily & the corresponding rainfall
display readings to zero.
Hold "MODE/UNIT/-" for 3 seconds to change the rainfall unit between mm and inch.
CLOCK & CALENDAR SETTING
- Hold "SET" button for 3 seconds to enter clock setting mode
Using "CLEAR/+" or "MODE/UNIT/-" to adjust and "SET" to confirm, the following values can be
-
set in sequence:
12/24hr format > Yr > month > Date > Hr > Min > EXIT
Hold 3 seconds
Toggle between inch & mm unit
Set Clock & Calendar
3