Center The Image On The Disc; Check The Ink Levels - Rimage 2000i Benutzerhandbuch

Center the image on the disc

The Rimage 2000i provides two ways to center the image on the disc. You can use the Auto Centering
method or the Manual Centering method. This procedure describes both processes. The Auto
Centering method is accurate to within +/- 0.5 mm. You can improve the centering position accuracy
with the manual centering adjustment to better than +/- 0.2 mm. For optimal print quality, use this
procedure to center the image on the disc.
Tip: For additional information
about these features, access
the online help in Printing
Preferences.
Tip: Use the Center Image
functionality only if the printed
image is not centered on the
disc. Image centering is set at
the manufacturer and usually
does not need to be
recalibrated in the field.
Tip: If you remove the ink
cartridges and reinsert them,
the system resets to show
that the cartridges are full,
regardless of the actual fill
status.
110763_I
Downloaded from www.Manualslib.com
1.
2.
3.
4.
5.
6.
7.
8.
9.

Check the ink levels

This functionality allows you to check the level of ink in the cartridges.
1.
2.
3.
4.
5.
manuals search engine
Navigate to Printing Preferences. Refer to page 8.
Load a disc in the printer.
a. To open the printer tray, press
b. Place a 120 mm white disc on the tray.
On the Service tab, select Service ToolBox. The Service
ToolBox dialog box displays.
Select Center Image. The Centering Margins for Disc Color
Printer 480i dialog box displays.
Follow the onscreen instructions to:
Auto Center the image
Or
Manually Center the image
When the image is centered, select OK to close the Centering
Margins for Disc Color Printer 480i dialog box.
To close the Rimage Service ToolBox window, select OK.
To close the Preferences window, select OK.
To close the printer tray, press
Navigate to Printing Preferences. Refer to page 8.
On the Service tab, select Service ToolBox. The Service
ToolBox window opens.
Select Get Ink Level. Ink level information displays in the Printer
Status field.
To close the Rimage Service ToolBox window, select OK.
To close the Preferences window, select OK.
Operate the Rimage 2000i
. The printer tray opens.
. The printer tray closes.
13