Safety And Compliance Information; Safety Precautions - Rimage Producer serie Benutzerhandbuch

Safety and Compliance Information

Safety Precautions

This manual and the indications on the product allow proper and safe operation. The indication marks below help
protect you and other persons from injury, and equipment from damage.
Warning! According to ANSI (American National Standards Institute) standards, a warning is used to indicate
situations that could result in bodily injury to personnel operating or maintaining the equipment.
Caution: Indicates that failure to observe this guideline could result in loss or damage to the equipment, product,
software, or data.
To ensure safety, please read the precautions in this document and familiarize yourself with their meaning before
using the equipment.
Warnings!
The laser beam used by the CD/DVD Recorder
is a Class 1 laser. Do not attempt to open the
recorder. An authorized technician should
perform all service procedures.
The laser beam used by bar code scanner is a Class
2 laser and can be harmful to the eyes. Do not
attempt to open the recorder. An authorized
technician should perform all service procedures.
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiant exposure.
Never use any optical instrument in conjunction with
this unit. To do so will greatly increase the hazard to
your eyes.
2000538_B
Downloaded from www.Manualslib.com manuals search engine
Important Information
Cautions:
For continued protection against risk of fire, replace the fuse
only with the same type and rating. An authorized technician
should perform all service procedures.
Use only the supplied AC power cord, or use a safety agency
approved power cord. For applications outside North America,
refer to the nearest Rimage office for assistance in selecting a
locally approved power cord.
This product is designed for an office environment.
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiant exposure.
The Producer 7100N and Producer 8100N contain a lithium
battery. There is a risk of explosion if the battery is replaced by
an incorrect battery. Dispose of the old battery according to the
manufacturer's instructions included with the battery packaging.
3