Maintenance; Troubleshooting - Sunred CUF17B Bedienungsanleitung

Remote control
A. To operate the heater on power (2000W), press on the left side button of the remote control
B. To operate the LED light, press on the right side button of the remote control
Touch switch
A. Press the touch switch one time to operate the heater on power (2000W).
B. Press the touch switch twice to operate the LED light.
C. Press the touch switch three times to operate the heater on power (2000W) and LED light.
D. Press the touch switch four times to off the heater power and LED light.
The main power switch must be turned on to operate the heater.

MAINTENANCE

Unplug the unit and let it cool completely.
To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use a mile detergent if
●
necessary. After cleaning, dry the unit with a soft cloth.
DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater. This may cause
●
damage or deterioration to the surface of the heater.
Although this heater is outdoor approved, DO NOT immerse the heater in water for your safety. Wait until the unit is
●
completely dry before use.
STORAGE
If the heater will not be used for a long period of time, store it in a cool, dry location when not in use.
To prevent dust and dirt build-up, use the original packaging to repack the unit.
TROUBLE SHOOTING
If the heater will not operate, please check the following before seeking repair of service:
Check if the power cord is plugged into an electrical outlet, if not plug in.
●
Check if electricity to the main fuse is working.
●
Make certain the power switch is turned on. If not, choose a setting.
www.sunred.nl