Chapter Iii Precautions - SATA AE5881 Bedienungsanleitung

Chapter III Precautions:
1When install the product, do not select the following places:
1.1The place in direct sunlight - adversely affecting heat dissipation.
1.2The place where the product may be exposed to rainwater, pipe dripping, water vapor - causing electrical shorts or rusting of casing.
1.3The place where vibration may occur - causing the instrument to give inaccurate readings.
1.4Slopy or uneven place - producing noise that affects operation
1.5The place with flammable gases or articles around.
1.6The place with a lot of oil gas, hot air, steam, corrosive gas (such as diesel engine, generator, chimney, painting site) - causing pollution,
affecting the radiator
1.7The place with a lot of wood chips, dust (near such as woodworking machine, cement tank, grinding machine) - easy to block the radiator
1.8The place with chemical gas, corrosive gas (such as electroplating bath, electro-bath, sulfuric acid, toilet) - causing damage to the
radiator
Rain
Dust, wood
chips
1.9Air compressor room or other equipment room without ventilation - easy to cause poor heat dissipation.
1.10Close to the wall or large equipment - adversely affecting heat dissipation and maintenance work.
26
AE5881/AE5882/AE5883
Please leave more
than 50cm of space
around the dryer for
heat dissipation and
maintenance
I need space
中文
EN
Wind
Painting
The ambient
temperature shall
be below 35° C
Vent
DE RU KO PT JA
paint
Methane,
acetylene
Exhaust fan
ES