Recording Using Quick Timer - Sony Black Trinitron KV-14V6D Bedienungsanleitung

ON
TIMER
SLEEP
SHOW VIEW
1 2
TIMER
ON SCREEN
4 5
TIMER REC
ON/OFF
7 8
TIMER REC
CLEAR
-/-- 0
REC QUICK TAPE
TIMER SPEED
REPLAY
INDEX SEARCH
REW
PLAY
STOP
To change the recording time
period after QUICK TIMER
recording begins
Press QUICK TIMER until the
desired time period appears.
To display the remaining time
period during QUICK TIMER
recording
Press . The recording time
period decreases minute by minute.
To stop QUICK TIMER recording
Press TIMER REC ON/OFF.
32
Basic Operations

Recording using QUICK TIMER

You can preset your video TV to start timer recording immediately and to
automatically stop recording after a specific time period.
If you have not set the clock, QUICK TIMER recording cannot be used.
MENU
If you are recording
OK
1
Press QUICK TIMER on the remote control.
3
"QUICK TIMER 0:00" appears on the screen.
6
2
Press QUICK TIMER repeatedly to select the recording time period. With
9
each press, the time period changes as follows:
C
0:00
PROGR
Even if you switch off the video TV, it continues recording. After the
selected time period has elapsed, recording stops automatically.
COUNTER
RESET
If you are not recording
PAUSE
1
Press ;, PROGR +/– or number buttons on the remote control, or PROGR
+/– on the video TV to switch it on.
FF
2
Insert a cassette with its safety tab.
3
Select the programme position which you want to record.
4
Press QUICK TIMER on the remote control.
"QUICK TIMER 0:00" appears on the screen.
5
Press QUICK TIMER repeatedly to select the recording time period. With
each press the time period changes as follows:
0:00
The time period turns yellow and recording starts.
Even if you switch off the video TV, it continues recording.
When the preset time period has elapsed, the video TV stops recording.
0:30 1:00 .... 7:30
0:30 1:00 .... 7:30
8:00
8:00