Werbung
Verfügbare Sprachen
Verfügbare Sprachen
In the case of problems, the following error messages may appear on the display:
Error message
E01
E02
E03
E06
E07
E08
The unit is in
stand-by mode,
no information
shows on the
display, and beep
signals are heard
Troubleshooting
Cause
The mains voltage is
below 160 V.
The mains voltage
exceeds 270 V.
Internal fault
Internal fault
The cooking
temperature exceeds
240 °C.
Internal fault
Unsuitable cookware
(non-magnetic base,
diameter less than
12 cm)
Action to be taken
Connect the unit to an outlet installed in
accordance with the regulations, with a
supply voltage between 220 and 240 V.
Connect the unit to an outlet installed in
accordance with the regulations, with a
supply voltage between 220 and 240 V.
Contact customer service.
Contact customer service
Turn the unit off, disconnect it from the
mains and allow it to cool down. Contact
customer service if the problem occurs
repeatedly.
Contact customer service.
See 'Suitable cookware' section
15
Werbung
