Flow Rate; Error Codes - Badger Meter LM OG-P2 Advanced Bedienungsanleitung

7.4 Flow rate

This option allows a user to see instantaneously the rate at which fluid is flowing through the meter.
2. Press and hold the 0.1 (FLOW RATE) button while fluid is flowing through the meter. The flow rate appears in the bottom
right hand corner of the display.
Flow rate option
NOTE: The flow rate can only be displayed if fluid is flowing through the meter.

7.5 Error codes

The meter has one error code that may display. It provides an indication, at the meter, that there is an error in communication
between the meter and keypad.
SF0 (scale factor 0) the scale factor setting for the meter is set to 0.000.
•
To input a valid scale factor for the meter, follow the instructions in
All other Error Codes are for factory purposes only.
•
To clear the meter, press reset.
May 2019
•
As long as the button is held down, the flow rate remains on the
display.
•
Releasing the button returns the display to the normal operating
screen.
"chapter 9 - Change factory
LM_OGP2Adv_BA_99_0045
Operating mode functions
settings".
Page 37