Meter installation
5.5 Apply nozzle to meter
Page 32
1.
On the opposite end, apply sealant to the end of the nozzle.
Recommended sealant is Loctite
2.
Thread the nozzle onto the meter. Screw it in tightly with an open
ended, adjustable, wrench.
3.
Open all dispense position shut-off valves. Start the pump to
pressurize the system.
4.
Before use, to ensure accuracy, purge all air from the fluid lines
and dispense valve(s).
5.
Attach the nozzle
LM_OGP2Adv_BA_99_0045
243.
®
May 2019