Automatic Mode - Steinbach APPcontrol Bedienungsanleitung

Automatic mode

1
No Display Function
1 Connection status ● Connected
● Not connected
2 Modes ● Pool fl oor (only clean the fl oor once)
● Pool wall (only clean the wall once)
● Clean the wall once and once the
fl oor
● Clean the fl oor three times and
once the wall
3 Cleaning start ● Start: Starts cleaning as above
● Stop: Stops automatic cleaning
"Auto Start" Modus
In "Auto Start" mode you have the choice between one-time and
periodic cleaning.
These types of cleaning can not be combined with each other!
2
3
2
4
5
3
No
1
2
3
4
5
6
7
ad 4: In "One-time cleaning" mode, the settings are sent to the control
unit and cleaning starts once after the set delay. In the periodic
cleaning mode, the data is sent to the control unit and cleaning starts
immediately and repeats after the set days.
ad 7: If 1 day is set, the pool robot will start at the same time each day*
with the cleaning cycle. For example, if you set 5 days, cleaning will be
repeated every fi fth day at the same time. *
* The time of day is used at which you confi rm the settings.
Download:
Android: Search the Google Play Store for "Steinbach APPcontrol"
iOS: Search the Apple Store for "Steinbach APPcontrol"
1
Display Function
Connection status ● Connected
● Not connected
One-time cleaning Starts the one-time cleaning after
the set delay
Settings for delay Duration: 1 hour - 23 hours
Confi rm After pressing this button, the app
sends the saved data to the control
unit
Delete Delete the current settings
Periodic cleaning Starts cleaning immediately and
repeats according to the settings
Settings for repeated Range: 1 - 10 days
cleaning
061023_v2004 EN
1
6
7
4
5
65