Herunterladen Inhalt Inhalt Diese Seite drucken

Operation; Technical Characteristics; Technische Kenmerken - De Dietrich GD95 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

2 Operation

At each thermostatic request, the servomotor on the flue damper is
supplied with electricity.
The reducer motor opens the damper and compresses a return
spring.
Thanks to the coupling of the motor shaft to the damper and a limit
switch, the burner can only start up when:
- If the servomotor is carefully fitted.
- If the flue damper is fully open.
The motor stays on as long as the burner is operating.
When the installation is switched off, the damper closes slowly under
the pressure of the return spring combined with a speed limiter.

2.1 Technical characteristics

CE identification no
Smoke temperature
Ambient temperature
Resistance
Opening time
Closing time
Servomotor
Consumption
Motor couple
Fuse
Electricity supply
Commutation current
Protection classification
(DIN40050)
Materials and thickness of the flue damper:
- Up to 150 mm in diameter: Stainless steel 0.8 mm
- Between 150 and 250 mm in diameter: Stainless steel 1.0 mm
- Diameter greater than 250 mm: Aluminised steel 2.0 mm
10
CE-0085AO 1027
Max. 400 °C
output 70 °C
< 1.2
> 7 seconds
7.5 seconds
STA 2 (S 1)
about 12 W
about 120 Ncm
6.3 A quick
230 V, 50 Hz
6 A
IP 44
GD95 - GD96 - GD97 - GD153
2 Werking
Bij ieder thermostatisch verzoek wordt de servomotor van de
afsluitklep van stroom voorzien.
De reductiemotor opent de klep en perst een terugstelveer samen.
Via het koppelen van de motoras op de klep en een eindschakelaar
kan de brander pas starten:
- Indien de servomotor zorgvuldig gemonteerd is.
- Indien de afsluitklep volledig open staat.
De motor blijft tijdens het werken van de brander onder spanning
staan.
Bij het spanningloos maken sluit de klep langzaam als gevolg van de
kracht
van
de
terugstelveer
snelheidsbegrenzer.

2.1 Technische kenmerken

CE-identificatienummer
Temperatuur van de rookgassen Max. 400 ºC
Omgevingstemperatuur
Weerstand
Openingstijd
Sluitingstijd
Servomotor
Verbruik
Motorkoppel
Zekering
Elektrische voeding
Omschakelstroom
Beschermingsklasse (DIN40050) IP 44
Materiaal en dikte van de afsluitklep:
- Een diameter van max. 150 mm: Rvs 0.8 mm
- Een diameter tussen 150 en 250 mm: Rvs 1.0 mm
- Diameter groter dan 250 mm: Staal met een aluminiumlaagje
2.0 mm
in
combinatie
met
CE-0085AO 1027
tot 70 ºC
< 1.2
> 7 seconden
7.5 seconden
STA 2 (S 1)
ca. 12 W
ca. 120 Ncm
6.3 A snel
230 V, 50 Hz
6 A
30/07/07 - 94858255 - 8358-4213C
een

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Gd96Gd97Gd153

Inhaltsverzeichnis