Lamp Power; Power Requirements - Peavey RQ 4300 Serie Handbuch

Hum and Noise:
Output Residual Noise
Master L/R
Mono
Submaster
(Hum and Noise Measurements: 22 Hz to 22 KHz BW)
Equivalent Input Noise (EIN):
-128 dBu (Input terminated with 150 Ohms)
Crosstalk:
>90 dB Adjacent Input Channels (20 Hz - 20 kHz)
>70 dB Left to Right Outputs (20 Hz - 20 kHz)
Common Mode Rejection Ratio (Mic Input):
50 dB min (20 Hz - 20 kHz)
70 dB typ @ 1 kHz
Meters:
L/R Master and all Submasters = 12 segment, peak reading
(0 dB= +4 dBu)
Signal / Overload Indicators:
Red LED lights 2 dB below clipping

Lamp Power:

12 VDC @ 350mA per connector, or 12VDC @ 700mA total maximum load

Power Requirements:

DOM: 100 VAC –240 VAC 50/60 Hz
Dimensions:
RQ 4324
™
Height: 8.9" (226 mm)
Width: 36.6" (930 mm)
Depth: 19.5" (495 mm)
Weight: 36 lbs. (16.4 kg)
Downloaded from www.Manualslib.com
S/N Ratio
Ref: 0 dBu
-105 dBu 109 dB
-90 dBu 94 dB
-98 dBu 102 dB
-88 dBu 92 dB
manuals search engine
Test Conditions
All Faders Down
Master Fader Nominal,
Channel Faders Down,
All Channels Assigned
All Faders Down
Submaster Fader
Nominal, Channel
Faders Down,
All Channels Assigned
70 Watts Nominal, 24 chan
80 Watts Nominal, 32 chan
RQ 4332
™
Height: 8.9" (226 mm)
Width: 44.6" (1132 mm)
Depth: 19.5" (495 mm)
Weight: 48 lbs. (21.8 kg)
19