Matrix CXC CONSOLE Bedienungsanleitung Seite 6

PAIRING CHEST TRANSMITTER TO CONSOLE
1) From sleep mode, press any key to activate the console.
2) Press and hold Set key (
3) For automatic pairing, press Mode Key (
below the stated heart rate. For heart rate pairing, you must be wearing a chest strap
and move to within 12" (30 cm) of the console marked with the ANT+ symbol.
4) Once heart rate has been paired, press Set key (
and adjust using the up/down keys (
For ANT+ chest transmitter, the code is alphanumeric; if an analogue 5.3Khz transmitter is
used 4 zero digits (0000) will appear.
Once the chest transmitter and console have been paired, the heart rate reading will
appear in the middle frame of the display. If pairing is unsuccessful after 20 seconds, or if
heart rate reading is incorrect, move closer to the console and press Mode key (
repeat the procedure.
6
* ). This will display heart rate and ANT+ symbol.
), this will display a four digit code
* ) to input personal data settings
).
) to