Matrix CXC CONSOLE Bedienungsanleitung Seite 5
Vorschau ausblenden
Andere Handbücher für CXC CONSOLE:
- Bedienungsanleitung (137 Seiten) ,
- Bedienungsanleitung (124 Seiten)
Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PAIRING SPEED TRANSMITTER TO CONSOLE
1)
Remove the battery from the console and the display should go blank.
2)
Insert the same battery again while pressing and holding any key. The
display will now show the maintenance screen.
3)
Press the Set key (
), which will show (SPD) in the middle display and (E01)
*
in the top display.
4)
Press Set key (
*
), which will show (SPD) in the middle display, 0 (RPM) in
the top display and (0000) in the bottom display.
5)
To pair automatically, press Mode key (
should match the code on the side of the cadence transmitter.
6)
To pair manually, press and hold the Mode key (
the 4 digit code (0000) should be flashing. Adjust the digit using the up/
down keys (
).
). The 4 digit alphanumeric
). The first digit of
7)
Press Set key (
*
) after each digit has been paired to the
transmitter.
8)
Press Set key (
*
) and
select distance in (KM) or
(Miles) by using the Up/
Down keys (
).
10) Press Set key (
*
) to finish and begin exercise.
9)
Press Set key (
*
) and
set the Gear Ratio to 1.0
by using the Up/Down
keys (
).
5
Werbung
Inhaltsverzeichnis
