Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
To do
Check all cables and connectors for damage
If damaged:
WARNING
Risk of electric shock and fire due to short circuit.
Have the device repaired immediately by a qualified
electrician
10.2 Cleaning
WARNING
Danger of electric shock
■ Do not bring the device into contact with moisture or water.
■ Always pull out the power supply plug before starting to clean the device.
NOTE
Only use the cleaning agents listed in the table below.
Device
Cleaning
Housing
Remove light and stubborn dirt carefully with a microfibre cloth.
Illuminant
Dab with a dust brush or dry, soft cloth.
NOTE: Do not clean the lamps with water.
10.3 Replacing the illuminant
WARNING
Only use appropriate LED illuminants for this device.
The LEDs may only be replaced by a qualified electrician.
Within the warranty period, please send the device to the manufacturer WALSER at
the address given.
11. Accessories and options
You find optimal accessories for your device in our webshop: www.foto-walser.de
12. Waste disposal and protection of the environment
Dispose of the device at a legally specified collection point, such as with the
manufacturer, electronics brands or at a local disposal depot. This service is free
of charge.
22
13. Technical specifications
Before each use
Device
X
Power supply unit
Power supply
Power supply unit
Weight
Dimensions (LxWxD)
Protective class
Brightness
LEDs (120 units)
Colour Temperature
Operation Temperature
Storage conditions
We are here for you!
If you need help or a free, individual consultation from our trained specialist
personnel, please contact our service team.
We are happy to help!
Your WALSER Team
Email/homepage
info@walser.de
www.walser.de
Our postal address:
WALSER GmbH & Co. KG
Senefelderstrasse 23
86368 Gersthofen
Germany
Our warranty promise
WALSER is known for its high-quality workmanship, optimal functionality and
customer-oriented service. To highlight our exceptional service level, we offer a 2 year
warranty for this Walimex pro product. This warranty is only valid in combination with
your purchase receipt.
If you would like to utilize our warranty, contact us by email at
info@walser.de. Our comprehensive guarantee as well as its scope the can be found
at www.foto-walser.de/en/warranty.
(Nominal power Input AC) 100-240V – 50/60 Hz,
Steplessly adjustable from 10% to 100%
Dry and dust free in cardboard box at -20 °C to +50 °C
Niclas Walser
Owner
LED Light Cube
Model 50 W
Voltage output 32V – 1.5A DC
ca. 3kg
ca. 40 cm x 40 cm x 40 cm
IP 20
ca. 5400 K
-10 °C to + 40 °C
23
Werbung
Inhaltsverzeichnis
