General Screen Options; System Configuration Screen Options - Dell Wyse 3040 Thin Client Benutzerhandbuch

Identifier
Version
Status

General screen options

This section lists the primary hardware features of your computer.
Option Description
System
•
Information
•
•
•
Boot Sequence
Boot Sequence
Boot List Options
Date/Time Allows you to change the date and time.
Identifier
Version
Status

System Configuration screen options

Option Description
UEFI Network Allows you to enable the UEFI Network Stack. By default, this function is not enabled. Select the Enable UEFI
Stack Network Stack check box to enable this function. If enabled, UEFI Networking protocols are installed/available,
allowing pre-OS and early OS networking features to use any enabled NICs and/or SFP. This may be used without
PXE turned on.
Integrated NIC Allows you to configure the integrated network controller. The options are:
•
•
•
USB Configuration This field configures the integrated USB controller. If Boot Support is enabled, the system is allowed to boot any
type of USB Mass Storage Devices (HDD, memory key, floppy).
If USB port is enabled, device attached to this port is enabled and available for OS.
If USB port is disabled, the OS cannot see any device attached to this port.
The options are:
•
•
•
Audio This field enables or disables the integrated audio controller. By default, the Enable Audio option is selected.
GUID-6BB0FB50-5D6C-4E49-B5D2-9BFB70B6A0EE
1
In translation
System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership Tag, Ownership Date,
Manufacture Date, and the Express Service Code.
Memory Information: Displays Memory Installed, Memory Available, Memory Speed, Memory Channels Mode,
Memory Technology, and DIMM A Size.
Processor Information: Displays Processor Type, Core Count, Processor ID, Current Clock Speed, Minimum
Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor L3 Cache, HT Capable, and 64-Bit
technology.
Device Information: Displays LOM MAC Address, Video Controller, and Audio Controller.
Allows you to change the order in which the computer attempts to find an operating
system. The options are:
• UEFI: Hard drive details
• IP4 Realtek PCIe GBE Family Controller
• IP6 Realtek PCIe GBE Family Controller
Allows you to change the boot list option:
• Add Boot Option
• Delete Boot option
• View
GUID-43A8CA4A-D334-4F18-992E-AB9E3220E22F
1
In translation
Disabled
Enabled
Enabled w/PXE: This option is enabled by default.
Enable USB Boot Support: This option is enabled by default.
Enable Front USB Ports: This option is enabled by default.
Enable Rear-Left Dual USB 2.0 Ports
BIOS overview 59