Herunterladen Inhalt Inhalt Diese Seite drucken

System Setup Overview; Boot Sequence; Navigationstasten - Dell Wyse 3040 Thin Client Benutzerhandbuch

Vorschau ausblenden Andere Handbücher für Wyse 3040 Thin Client:
Inhaltsverzeichnis

Werbung

Identifier
Version
Status

System Setup overview

System Setup allows you to:
Change the system configuration information after you add, change, or remove any hardware in your thin client.
Set or change a user-selectable option such as the user password.
Read the current amount of memory or set the type of hard drive installed.
Before you use System Setup, it is recommended that you write down the System Setup screen information for future reference.
VORSICHT:
Unless you are an expert thin client user, do not change the settings for this program. Certain changes can
cause your thin client to work incorrectly.
Identifier
Version
Status

Boot Sequence

Boot Sequence allows you to bypass the System Setup–defined boot device order and boot directly to a specific device. During the
Power-on Self Test (POST), when the Dell logo appears you can:
Access System Setup by pressing F2 key
Bring up the one-time boot menu by pressing F12 key
The one-time boot menu displays the devices that you can boot from including the diagnostic option. The boot menu options are:
UEFI Boot
UEFI: Hard drive details
IP4 Realtek PCIe GBE Family Controller
IP6 Realtek PCIe GBE Family Controller
Other options
BIOS Setup
BIOS Flash Update
Diagnostics
ANMERKUNG:
Choosing Diagnostics, will display the ePSA diagnostics screen. To access the System setup menu,
click BIOS Setup.
Identifier
Version
Status

Navigationstasten

ANMERKUNG:
Bei den meisten Optionen im System-Setup werden Änderungen zunächst nur gespeichert und erst beim
Neustart des Systems wirksam.
Tasten
Navigation
Pfeil nach oben
Zurück zum vorherigen Feld
Pfeil nach unten
Weiter zum nächsten Feld
Eingabetaste
Wählt einen Wert im ausgewählten Feld aus (falls vorhanden) oder folgt dem Link in diesem Feld.
<Leertaste>
Öffnet oder schließt gegebenenfalls eine Dropdown-Liste.
Registerkarte
Weiter zum nächsten Fokusbereich.
<Esc>
Wechselt zur vorherigen Seite, bis das Hauptfenster angezeigt wird. Durch Drücken der Esc-Taste im
Hauptfenster wird eine Meldung angezeigt, die Sie auffordert, alle nicht gespeicherten Änderungen zu speichern.
Anschließend wird das System neu gestartet.
58
BIOS overview
GUID-92A05F30-55D9-4528-80C6-5199E6E71FD5
1
In translation
GUID-569FA4DE-9398-4878-BA44-A8E5B05CCFF3
1
In translation
GUID-7A7EB30A-4A48-422B-AE30-B8DC236A1790
11
Translation Validated

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis