Post Behavior Screen Options; Virtualization Support Screen Options - Dell Wyse 3040 Thin Client Benutzerhandbuch

Option Description
Default setting: Power Off
Auto On Time Allows you to set the time at which the computer must turn on automatically. The options are:
•
•
•
•
Default setting: Disabled
USB Wake Allows you to enable USB devices to wake the system from Standby.
Support
•
Default setting: The option is disabled.
Wake on LAN Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a
LAN signal.
•
•
•
Default setting: Disabled
Identifier
Version
Status

POST Behavior screen options

Option Description
NumLock LED Allows you to turn on the NumLock LED when the system boots. Select the Enable NumLock LED check box to
turn on this function.
Keyboard Errors Allows you to report the keyboard related errors when the system boots. Select the Enable Keyboard Error
Detection check box to enable this function.
Fastboot Allows you to speed up the boot process by bypassing some of the compatibility steps. The options are:
•
•
•
Extended BIOS Allows you to create an additional preboot delay. The options are:
POST Time
•
•
•
Identifier
Version
Status

Virtualization support screen options

Option Description
Virtualization Allows you to enable or disable the Intel Virtualization Technology.
62 BIOS overview
Disabled
Every Day
Weekdays
Select Days
ANMERKUNG: This feature is only functional when the AC power adapter is connected. If the AC
power adapter is removed during Standby, the system setup removes power from all the USB
ports to conserve battery power.
Enable USB Wake Support
Disabled
LAN Only
LAN with PXE Boot
GUID-368A9B1B-FA2B-4736-BAAA-45A35C4414B3
1
In translation
Minimal
Thorough (default)
Auto
0 seconds. This option is enabled by default.
5 seconds
10 seconds
GUID-BB9BB636-3020-4097-9E3A-7D3B0A4D4E22
1
In translation