Technical Data - A&D UT-201BLE-A Bedienungsanleitung Übersetzung

Model
Measurement method
Measuring site/Reference body site Oral, under tongue
Temperature sensor
Measurement range
Measurement accuracy
Measurement time
Display
Power supply
Battery life
Useful life
Wireless communication
EMD
Memory
Classification
Applied part
Operating conditions
Transport/Storage conditions -20 °C to +60 °C / 15%RH to 95%RH
Dimensions
Weight
Accessory
Note: Specifications are subject to change for improvement without prior notice.

Technical Data

UT-201BLE-A
Adjusted mode measurement using thermistor,
Direct mode measurement using thermistor
Thermistor
32.0 to 42.0 °C (89.6 to 107.6 °F)
±0.1 °C
Adjusted mode measurement : Approx. 30 seconds
Direct mode measurement : Approx. 5 minutes
3 digits, resolution 0.1 °C
4 digits, resolution 0.1 °F
CR2032 x1 (3V Lithium battery)
Use only battery that conforms to the IEC
60086-4.
Adjusted mode measurement : Approx. 350 times
Direct mode measurement : Approx. 120 times
5 years
VZ (MURATA Manufacturing Co. Ltd.)
Bluetooth Ver.4.0, low energy, HTP
Frequency band: 2402 MHz to 2480 MHz
Maximum RF output power: 1.6 dBm
Modulation:GFSK
IEC 60601-1-2 : 2014
Last measurement
Internally powered ME equipment
Continuous operation mode
Type BF
+10 °C to +40 °C / 15%RH to 85%RH
800 kPa to 1060 kPa
700 kPa to 1060 kPa
Approx. 40 [W] x 117 [H] x 15 [D] mm
Approx. 25 g including battery
Case, a temporary battery,
this instruction manual
English 18