Features; Adjusted Mode Measurement; Direct Mode Measurement; Switch With Flash Action - A&D UT-201BLE-A Bedienungsanleitung Übersetzung

Adjusted Mode Measurement

The adjusted mode
measurement calculates the
direct mode temperature
after five minutes when the
body temperature is
measured for 30 seconds. It
is based on an ascending
thermal curve.
If you need a precision data,
we recommend to use the
direct mode measurement for
a precision thermometry.
Results of Clinical Evaluation
Clinical Bias
Clinical Repeatability
Limit of Agreement
Standard Deviation

Direct Mode Measurement

The body temperature can be measured using for five minutes.

Switch with Flash Action

When pressing the
When finishing the measurement, this switch flashes.

Last Reading Display and Memory

The previous reading stored in memory is automatically displayed when
turning on the thermometer. The new reading is stored in memory when
measuring the temperature.

Temperature Unit

Temperature unit of Celsius or Fahrenheit can be selected .

Bluetooth

Temperature data can be transmitted to the receiver that is paired with the
thermometer.

Features

Body temperature
Adjusted mode
calculation
Room temperature
-0.06 °C
0.12 °C
0.22 °C
0.08 °C
switch , this switch flashes.
English 15
Direct mode reading
Adjusted mode
reading
Thermal curve
in ascending.
30 seconds
5 minutes