Maintenance; Cleaning; Storage; Cautions - A&D UT-201BLE-A Bedienungsanleitung Übersetzung

Maintenance

Do not open the device. It uses delicate electrical components and an
intricate air unit that could be damaged. If you cannot fix the problem
using the troubleshooting instructions, request service from your dealer
or from the A&D service group. The A&D service group will provide
technical information, spare parts and units to authorized dealers.
The device was designed and manufactured for a long service life.
However it is generally recommended to have the device inspected
every two years, to ensure proper functioning and accuracy. Please
contact the authorized dealer in your area or A&D for maintenance.

Cleaning

Clean the device with a dry, soft cloth or a cloth dampened with water and a
neutral detergent and wrung tightly.
Wipe the temperature sensor of the device with a cloth to soak disinfectant
ethanol (76.9 to 81.4 v/v%).

Storage

Store the device with avoiding extremes in temperature, humidity, direct
sunlight, vibration, shock, dust or fire. Keep it put into the case with dry air
and room temperature.

Cautions

The device is not a waterproof device. Do not splash water on it and avoid
exposure to moisture.
Do not use an organic solvent such as thinner or benzene.
The device cannot be sterilized by autoclave, EOG or formaldehyde etc.

Regular Inspection

The thermometer is a precision device. Therefore, inspect it regularly.
Request an inspection to the dealer where you have purchased the device
when the device is in needs of an inspection.

Disposal

This equipment and battery are not treated as ordinary household waste and
must be disposed of according to the applicable local regulations.
Item
Package
Main unit and
accessories
Temperature sensor
Battery
Maintenance
Parts
Box
Cushioning material
Enclosure
Internal parts
Storage case
SUS CAP
English 17
Material
Cardboard
PVC
ABS
General electronic components
PP
SUS304
Lithium battery