Applying The Thermometer; Measurement Time; After Measurement - A&D UT-201BLE-A Bedienungsanleitung Übersetzung

Using the Thermometer

Applying the Thermometer

Put the thermometer sensor on the mouth floor under the tongue, at the
root of the tongue and at the side of the lingual frenulum.
Keep the position of the sensor during measurement
Tongue

Measurement Time

When the adjusted mode measurement is used, keep the sensor
position for approximately 30 seconds with placing the sensor at a
correct position in the mouth.
When the direct mode measurement is used, keep the sensor position
for approximately 5 minutes with placing the sensor at a correct position
in the mouth.
We recommend to use the direct mode measurement for a precision
thermometry.

After Measurement

After measurement, press and hold the
seconds to turn the device off.
Note: The device has an automatic power shut-off function, which turns the
power off approximately one minute after measurement.
Lingual frenulum
Sensor position
English 12
Tongue
Mouth floor
switch for one or more