Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
I80
Step 5 /
6
Turn the speaker far enough to one
side so that the connecting terminal
for the speaker cable is easy to
access. Now strip about 15 mm of the
insulation off the end of the cables
and connect them to pin connectors.
Connect the plus to the
speaker connector
Connect the minus to the black
speaker connector
Protect the ends of the cables - see Page 6.
P
LEASE NOTE
Before connecting the
speakers to your hi-fi system
(amplifier, receiver, power amplifier
etc.), make sure this has been fully
unplugged from the mains.
Step 6 /
6
The speakers are lined up in the last
step. This should be done such that
both speakers are directed towards
the listening position.
If it is a big listening area, the best
angle can be ascertained by carrying
out some sound tests. Because of the
broadband
and
emission characteristics of the I80, it
is no problem providing sound for
large areas.
7
red
Figure 7
Note: Incorrect speaker polarity
If one or more speakers are
connected with the wrong polarity,
there is a significant reduction in the
bass reproduction and the sound
portrait is uneven and diffused.
homogeneous
Lining up: +/- 85° in +/- 18 steps
Re:sound I
Werbung
Kapitel
Inhaltsverzeichnis
