Mettler Toledo M200 Schnellstartleitfaden Seite 36

Navigation keys
Menu
Cal
ESC
Menu Cal
Info
Enter
h
Note: Some screens require configuring multiple values via the same data field (ex: configuring
multiple set points). Be sure to use the c or b key to return to the primary field and the m or
. key to toggle between all configuration options before entering to the next display screen.
"Save changes" dialog
Yes & Exit
Yes & u
No & Exit
en
36
Description
• Enter Menu mode.
• Navigate backwards within a changeable data entry field.
• Enter Calibration mode.
• Navigate forward within a changeable data entry field.
Return to Measurement mode. Press the b and c key simultane-
ously (escape).
NOTE: In order to back up only one menu page, move the cursor
under the UP Arrow character (u) at the bottom right of the display
screen and press [ENTER].
• Increase a digit.
• Navigate within a selection of values or options of a data entry
field.
• Enter Info mode.
• Decrease a digit.
• Navigate within a selection of values or options of a data entry
field.
Confirm action or selection.
Description
Save changes and exit to measurement mode
Save changes and go back one screen
Do not save changes and exit to measurement mode