Konfiguration des AP-3 unter Verwendung von CLI-
Befehlen
Anmeldung im AP-3 unter Verwendung von HyperTerminal
1.
Starten Sie HyperTerminal über Start > Programme.
Öffnen Sie den Terminal-Emulator, richten Sie folgende
Verbindungseigenschaften ein:
— COM-Port: (COM1, COM2 usw., je nach Konfiguration des
Computers);
— Baudrate: 9600
— Datenbits: 8
— Stoppbits: 1;
— Flusssteuerung: Keine
— Parität: Keine
2.
Zeilenvorschub mit Zeilenrücklauf (in Hyper Terminal wählen Sie:
File -> Properties -> Settings -> ASCII Setup -> Send Line Ends with Line
File -> Properties -> Settings -> ASCII Setup -> Send Line Ends with Line
File -> Properties -> Settings -> ASCII Setup -> Send Line Ends with Line
File -> Properties -> Settings -> ASCII Setup -> Send Line Ends with Line
Feeds
Feeds
Feeds
Feeds
.)
3.
Geben Sie das CLI-Kennwort ein. Das Standardkennwort lautet "public".
ANMERKUNG
Wir empfehlen, die Standardkennwörter so bald wie möglich zu ändern.
Dieses Verfahren unter Verwendugn der CLI-Befehle ist unter "Change
Passwords" beschrieben.
Avaya Wireless AP-3 User's Guide
6-27