Installation - Renkforce AC-239 Bedienungsanleitung

• Never let the packaging material lie around unattended. Plastic foil /
bags etc. can become a dangerous toy for children; there is a risk of
suffocation.
• If you have reason to believe that the device can no longer be operated
safely, disconnect it immediately and make sure it is not unintentionally
operated.
• Thunderstorms pose a threat to any electrical appliance. Overvoltage
in the mains supply can damage the device.
• The product is intended for dry indoor use only.
• No devices with strong electric or magnetic fields such as mobile phones,
radio devices, electric engines etc. should be in the proximity of the alarm
system, etc.). Direct heat sources may also lead to functional impairment.
• Operating voltage is between 12 and 16V/DC.
• Never pour fluids on electrical devices.
• Never operate the product when it is covered. Always ensure proper
ventilation!
• Also observe the operating instructions for the products used together
with this alarm system.
• Repair must only be carried out by a qualified specialist or a specialist
workshop.
• If you have questions which are not answered in this manual, please
contact our technical consulting service.

6. Installation

Ensure that the alarm control centre is non-charged and without power
supply during installation.
When drilling, make sure you do not accidentally damage any power
lines, gas pipes or water pipes!
26