Herunterladen Inhalt Inhalt Diese Seite drucken

Renkforce AC-239 Bedienungsanleitung Seite 37

2-zonen alarmanlage
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Status LED
Permanently lit
Meaning
- Error in alarm
zone 1 or 2
- Sensor was
triggered
- Alarm system was
not disarmed
after an alarm
Explanation
- Error in alarm zone 1 or 2:
Check the sensor connections of
alarm zones 1 or 2 and their
sensors
- A sensor was triggered:
Check the connected sensors.
Check if windows or doors are
opened where a door/window
detector (=magnetic contact) is con-
nected.
- After the alarm system has triggered
an alarm and the
acoustic signalling duration
(= approx. 3 minutes) has passed,
the alarm message is stored and
optically indicated by a permanently
lit status LED. In this case, check all
sensors and the connection of
alarm zones 1 and 2 to determine
the cause that triggered the alarm.
Then disarm the alarm system by
setting the "mode selection switch"
to "OFF".
37

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis