How To Change The Position Of The Connector Panel - Panasonic AW-CB400L Bedienungsanleitung

How to change the position of the connector panel

The position of the connector panel can be changed from the rear panel to the bottom panel.
1 Remove the three screws of the bottom and side panels
to remove the blank panel.
2 Remove the three screws of the rear and side panels to
remove the connector panel.
3 Secure the blank panel to the rear panel using the
screws.
4 Remove the two rubber feet of the blank panel.
5 Secure the connector panel to the bottom panel using the
screws.
Remove the
blank panel.
(Rear view)
(Rear view)
Attach the blank panel.
Attach the
connector
panel.
19 (E)
Screws (!3)
Screws (!3)
Connector panel
Screws (!3)
Rubber feet
Screws (!3)