Air Filter; Spark Plug - Zipper Maschinen ZI-STE2800 Betriebsanleitung

 Refill new engine oil to the lower edge of the oil filler neck.
ATTENTION: Dispose the old oil PROPERLY!!!
Pour it into a leak proofed box and bring it to a
recycling center.
 Screw back the screw cap on the oil filler neck.

15.1.2 Air filter

 Remove the cover of the air filter.
 Take out the air filter.
 Clean it with water.
 Wring it out.
 Let the air filter become saturated with engine oil.
 Wring out the air filter.
Mount the air filter again.
 Insert air filter
 Replace the cover
 Secure snap closure
ATTENTION: NEVER OPERATE THE MACHINE
WITHOUT OR A NOT MAINTAINED AIR FILTER!!!

15.1.3 Spark plug

 Remove the spark plug cap
 Screw out the spark plug.
 Optical Control: When the electrodes are battered or the isolation is
damaged – change the spark plug!
 Clean the spark plug.
 Control the distance between the two
electrodes: 0,6 – 0,7 mm!
ZIPPER MASCHINEN GmbH
ZI-STE2800; ZI-STE5500; ZI-STE800; ZI-STE8004
www.Zipper-Maschinen.at
0,7 -0,8
MM
MAINTENANCE
GASKET RING
42