Maintenance; Maintenance Plan; Changing The Engine Oil - Zipper Maschinen ZI-STE2800 Betriebsanleitung

15

MAINTENANCE

WARNING:
Lack of maintenance or improper maintenance and repair before using the appliance can result in
serious injury or death! Take therefore the safety rules, operating and maintenance instructions
very seriously.
Repairs only by qualified staff!
Hot surfaces and rotating machine parts while the engine is running can cause
serious injury or even death. Always stop the machine before carrying out any
conversion, adjustment, cleaning or maintenance work and secure it against
unintentional restarting.

Maintenance plan

(1) Interval can vary according
to the air quality
(2) Only by specialists!
Engine oil
Air filter
Spark plug
Valve clearance
Fuel tank and fuel
tank filter
Fuel pipe

15.1.1 Changing the engine oil

Change the oil when it's still warm from the operation.
Ensure that the engine switch in the OFF position.
 Turn the switch to the OFF position, if set to ON.
 Unscrew the fixing screw of the side cover off, remove the cover.
Unscrew the oil filler cap.
 Tilt the machine and let the oil flow into a box.
ZIPPER MASCHINEN GmbH
ZI-STE2800; ZI-STE5500; ZI-STE800; ZI-STE8004
Controll of
the level
Changing
Controlling
Changing
Control
Change
Control,
adjustment
Clean
Control
www.Zipper-Maschinen.at
W A R N I N G
Prior to (for new
each machine)
start after first
Month or
20
operation
hours
X
X
X
MAINTENANCE
Every 3 Every 6
months months or
or every every 100
50 operation
operatio hours
n hours
X
X (1)
X
Yearly (2)
Every 2 years (2)
Every 2
years or
every 300
operation
hours
X
X(2)
41