Verify Product Setup - HP LaserJet 9000mfp Inbetriebnahme

Step 16 Verify product setup
To verify that the product has been set up correctly to copy, send, and
print, follow the steps below.
To verify copying
1
2
If the document does not copy correctly, check your product
installation. For additional information, see the online use guide at
http://www.hp.com/support/lj9000.
To verify sending
1
2
Note If you cannot gain access to Send Options, check your product
installation and configuration. For additional information, see the online
use guide.
3
4
5
6
7
The product sends the document to you as an e-mail attachment.
If the document does not send correctly, check your product
installation and configuration. For additional information, see the
online use guide.
34 Product Setup
Place a one-page document face down on the glass.
Press S .
TART
Place a one-page document face down on the glass.
On the touch screen of the graphical display, touch Send
Options.
Touch From: and then enter your name using the touch screen
keyboard.
Touch OK.
Touch To: and then enter your own e-mail address.
Touch OK.
Press S .
TART
ENWW