Inhaltsverzeichnis
Werbung
Seamax Portable12V SUP-20D Electric Air Pump for Inflatable SUP, Kite and Inflatable Boat
▪
Plug the pump power adapter into the car's 12V DC socket, or to a battery with a convertor.
▪
Connect the end with flexible conduit adaptor (1) of the air hose with the air pump inflation port (1), and twist clockwise
to tighten it (Figure 1).
▪
Connect the other end of the air hose with an air valve adapter. Insert it into the supported product's air valve and twist
clockwise to fix it (Figure 2).
▪
Press the air pressure unit toggle button [PSI/BAR] to select your preferred unit such PSI or BAR.
▪
Press the Increase Air Pressure button [+] or Decrease Air Pressure button [-] to set the desired target pressure value
matching with your inflatable product's air pressure requirement from 0.5 PSI to 20 PSI (1PSI=0.0689BAR).
▪
The pressure setting increasement is 0.5 PSI. Press the On/Off power switch button to start the pump.
▪
During the inflating process, you can press the Increase Air Pressure button [+] or Decrease Air Pressure Button [-] to
adjust the target air pressure value. Press the Air Pressure Unit toggle button [PSI/BAR] to switch the air pressure unit.
Pressing the On/Off power button can stop pumping manually.
▪
During the inflating process, the LCD screen displays the inflatable product's on-going real time air pressure. The preset
target air pressure number will appear in every 3 seconds in flashing mode for the user's information.
▪
Remove the hose from the inflation port. Connect the end with flexible conduit adaptor (11) of the hose with the air
pump deflation port (2). Twist clockwise to tighten it (Figure 3). The other end shall still be to the inflatable product.
▪
Press the On/Off Power Button to start the deflation until all the air inside the inflatable product is discharged. Turn off
the air pump to stop the deflation.
INFLATION OPERATION
DEFLATION OPERATION
Page 9
www.seamaxmarine.com 1877-907-7766
Werbung
Inhaltsverzeichnis
