Inhaltsverzeichnis
Werbung
Seamax Portable12V SUP-20D Electric Air Pump for Inflatable SUP, Kite and Inflatable Boat
▪
Select a valve adapter and an O-Ring with correct thickness to fit your inflatable product's air valve.
▪
You can use your original valve adapter if it provides better inflation result than using the ones provided with the pump.
To modify the valve connector won't affect your pump existing warranty coverage.
▪
Test Run is necessary before the first time use. You can stop the pump any time by pressing its power button. Do NOT
leave the pump running unattended even considering its auto stop feature!
▪
Do NOT let the pump running for more than 20 minutes continuously. Inflate one SUP / Paddle Boat at a time. Extended
usage beyond its recommended continuous running time can cause overheating and damage the internal inflator.
▪
Using smaller valve fittings limits the airflow speed, so the pump will be easier to get overheated. User's attention is very
important for this type of application. The max 20 minutes continuous working time must be reduced accordingly.
▪
Low quality instable power source will decrease the pump running performance. The needed time to complete inflating a
product will be increased. This can cause overheating issue and damage the pump's inflator quickly. Do NOT operate the
pump with any low capacity, low voltage, and low quality battery.
▪
If the air hose section near the pump port is getting warmer such as over 60ºC (92ºF), stop using the pump immediately
to let it cool down first.
▪
If the environment temperature is too high, the pump's maximum continuous working time shall be reduced accordingly.
FIRST TIME USE
Product Dimensions: 10x7x7 inches / Weight 4 Lbs
Page 8
www.seamaxmarine.com 1877-907-7766
Werbung
Inhaltsverzeichnis
