Care and maintenance
of the device
• Before cleaning disconnect the heater from the
power supply.
• Before cleaning, make sure that the heater is
completely cooled.
• The unit can be cleaned only with a soft cotton
cloth. Cloth can be slightly moistened. After this, wipe
it dry without leaving spots.
• Make sure the heater is completely dry, before you
connect it to the network.
WARNING! Do not use aggressive cleaning
agents, and products containing abrasives. The
surface (picture) may be damaged.
Storage conditions
• Devices should be stored at ambient temperatures
from +5 to +40 degrees C and relative humidity of 60 -
70%.
• Do not store devices in areas with liquids and
substances, evaporation which can cause corrosion.
Repair and maintenance
servicing
WARNING! Repair and replacement of heaters
must be exclusively in the specialized service center
or personnel authorized to directly execute the work.
Dear Customer! Please read all instructions from
beginning to end. It is very important for your safety
and your family. If necessary, contact the service
vendor.
Rules of recycling
• The product does not contain a materials which
require special installations of recycling technologies.
• When product is decommissioning, it must be
disassembly with subsequent sorting of scrap by
groups for ferrous, ferrous metals and non metals and
their utilization in accordance with the rules,
regulations and methods that are in place recycling.
• The product does not contain a precious metals.
EN
20
Warranty conditions
Congratulations on acquiring high quality
equipment!
Carefully read the warranty certificate and ensure
that it is properly filled and had the stamp of the
seller. In the absence of the stamp and the date of
sale (cash check with the date of sale) warranty
certificate is considered invalid.
Thoroughly check the appearance of the product
and its completeness, all claims on appearance and
completeness of your products show to the Seller
when buying the product.
After-sales service of purchased device carried
out through the seller or specialized service centers.
For all questions related to the maintenance of
the product, contact a qualified service center.
Detailed information about service centers,
authorized to carry out repairs and maintenance of
products is available at dimol.ua
WARNING! In case of failure of the appliance
during the warranty period specified, the device must
be put into dedicated service center, along with
packaging, warranty certificate and check of buying
this device. With a lack of one of the paragraphs,
warranty repairs are not carried out.
To install (connect) the product (if the product
requires special installation, connection or assembly)
we recommend apply to specialized service centers.
You can use the services of any qualified experts,
however The Seller, authorized by the manufacturer
organization, importer, manufacturer is not liable for
defects of the product arising from its improper
installation (connection).
In construction, equipment or technology of
products in order to improve its performance,
changes can be made. These changes are made to
the product without prior notice to Buyer and do not
involve commitments to change/improve the
previously released products. We urge you to avoid
confusion for the installation/operation of the product
carefully study its instruction manual. Do not make in
Warranty Certificate any changes, and correct or
rewrite data specified therein. The warranty is valid if
the Warranty Certificate correctly/accurately filled
and it is listed: name and product model, serial
number, date of sale, and is authorized signature and
stamp of the Seller.