Operation - Bestway 58497 Gebrauchsanleitung

2
1
3
For pool with 32 mm(1.25 in.) valve
P6916
STOP

OPERATION

Timer
1. Plug into power source, adjust power switch to "ON" (-)
position. The sand filter will begin working immediately.
2. Adjust power switch to "OFF" (0) position. The sand filter will
stop working immediately.
3. After turning on, you can adjust work time, rest time and cycle
time by turning the knob to desired position. See the table
below for more details.
4. When the timer knob is moved into new position, the filter's
previous cycle automatically cancels so new cycle can begin.
5. Each time the filter is powered on or restarted, a new cycle
will begin based on timer knob position.
NOTE: If the knob is adjusted to the 24-hour position (24), the
sand filter will work continuously without any rest period.
2
D
Garden hose (not
included)
For Drain, Backwash,
Rinse function
A
P61318
Before switching on, please read the manual carefully.
D
B
P61322
10
A
B