Entering Personal Data; Body Analysis - ADE BA 1300 Bedienungsanleitung

Entering personal data

1. Press SET.
On the display, a flashing memory cell number (1-12) will be shown.
2. Using the or the
3. Press SET.
Using the or the
4. Press SET.
On the display, the preset value for height (e.g. "165" for cm) will flash.
5. Using the or the
6. Press SET.
On the display, the preset value for age (preset: 25) will flash.
7. Using the or the
8. Finally, press SET. You have thus entered the required data.
On the display, a memory cell number will flash again and you can proceed, as
previously described, and enter the data of another person.
Or wait a few seconds until "0.0" is shown on the display and you can undertake
your body analysis.
If you do nothing else, the scales will automatically switch off after a few seconds.
‚ If you hold down the
flow of the displayed data will occur more quickly.
‚ Entered data can only be overwritten by making a new entry.

Body analysis

‚ Body analysis is only possible if your data has been entered (see
previous chapter).
‚ See the chapter "Weighing Tips".
1. Briefly press SET, in order to switch the scales on.
2. Using the or the
your personal body data.
The data is briefly displayed, then "0.0" and the selected unit of measurement, e.g.
"kg".
3. Position yourself barefoot on the scales. Remain standing still and do not hold on to
anything.
− In doing so, ensure each foot is placed on a sensor.
− There must be no contact between your feet, your legs, your calves, or your
thighs. Otherwise, the measurement will be imprecise.
Body Analyser Scales BA 1300-1304
button, select the desired memory cell.
button, choose your sex: for male, or
button, enter your height.
button, enter your age.
or the
button, select the memory cell in which you have recorded
Entering personal data
for female.
button, the forward and backward
23