Troubleshooting; Service Centre; Environmental Protection - Concept CA1000 Bedienungsanleitung

EN
TROUBLE SHOOTING
Before performing any of the following steps, first unplug the appliance from the electrical outlet.
Insufficient airflow.
The unit cannot be turned on.
There is too much noise.

SERVICE CENTRE

Extensive maintenance or repair, which requires access to internal parts of the product, has to be performed by
a qualified specialist or the service centre.

ENVIRONMENTAL PROTECTION

• Prefer recycling of packaging materials and old appliances.
• Packaging materials may be disposed of as sorted waste.
• Dispose the plastic bags made of polyethylene (PE) of as sorted waste.
Recycling of the appliance at the end of its lifespan:
This appliance is labelled in accordance with European Directive 2012/19/EU concerning used
electrical and electronic appliances (waste electrical and electronic equipment - WEEE). The symbol
on the product or its packaging indicates that this product may not be treated as household waste. It
is necessary to take it to a container park for the recycling of electrical and electronic equipment. By
ensuring the correct disposal of this appliance you will help prevent potential negative consequences
to the environment and human health, which could otherwise result from inappropriate disposal of
this product. Disposal must be performed in accordance to the regulations for waste disposal. For
more detailed information about recycling of this appliance see the authorized local office or service
for household waste disposal or the shop, where you purchased the appliance.
The product meets all the necessary requirements of the EU directives applicable to the specific
product.
Changes in text, design, and technical specifications are subject to change without notice and we reserve the right to
change them.
38
Make sure the filters are clean.
Check for obstructions in the air inlet/outlet.
Check the power and fuses.
Make sure that the front cover is properly fastened.
Make sure the filters are firmly in place.
Check, there is no foreign object in the ventilator.
The filter may be clogged and need to be replaced.
The foam seal is not installed properly.
The appliance is not levelled properly.
CA1000