Concept CA1000 Bedienungsanleitung Seite 36

EN
3. TIMER BUTTON:
1. By pressing this button, you can set the air purifier operation time to 2, 4 or 8 hours (2H, 4H, 8H). The appliance turns
off automatically after the set time.
2. Press the timer button and select the desired length of operation. The indicator shows which option is selected.
3. If you want to select continuous operation, press the timer button repeatedly until the indicator (2H, 4H, 8H) turns
off.
Note: Disconnect the appliance from the mains when you are not going to use the appliance.
FILTER INSTALLATION AND REPLACEMENT
FILTER REPLACEMENT INDICATOR
If the POWER indicator is flashing, the filter needs to be changed. Replace the filter as instructed, then press and hold
the on/off button for 5 seconds and restart the system. The indicator will stop flashing. The combined filter lasts about
6 months.
A label for writing down the date of filter replacement.
ENTER THE DATE OF INSTALLING THE NEW FILTER
Day
Place the label inside the appliance.
1. Open the front cover of the appliance.
2. Grab the combined filter by the two straps and remove the filter.
3. Insert a new combined filter into the appliance. Make sure you have placed the filters correctly.
4. Attach the pre-filter to the combined filter.
5. Close the front cover and secure it properly.
6. Press and hold the on/off button for 5 seconds to reset the indicator.
36
Month Year
CA1000