Protecting Against Electrostatic Discharge; Battery Disposal - Dell OptiPlex SX System Installierung Und Schnellreferenzhandbuch

When Using Your Computer (continued)

Protecting Against Electrostatic Discharge

Static electricity can harm delicate components inside your computer. To prevent static damage,
discharge static electricity from your body before you touch any of your computer's electronic
components, such as the microprocessor. You can do so by touching an unpainted metal surface
on the computer chassis.
As you continue to work inside the computer, periodically touch an unpainted metal surface to remove
any static charge your body may have accumulated.
You can also take the following steps to prevent damage from electrostatic discharge (ESD):
• Do not remove components from their antistatic packing material until you are ready to install the
component in your computer. Just before unwrapping the antistatic packaging, discharge static
electricity from your body.
• When transporting an electrostatic sensitive component, first place it in an antistatic container
or packaging.
• Handle all electrostatic sensitive components in a static-safe area. If possible, use antistatic floor
pads and workbench pads.

Battery Disposal

Your computer uses a lithium coin-cell battery. The lithium coin-cell battery is a long-life battery, and it is
very possible that you will never need to replace it. However, should you need to replace it, see your User's
Guide.
Do not dispose of the battery along with household waste. Contact your local waste disposal agency for
the address of the nearest battery deposit site.
Setup and Quick Re ference Guide
11