General Information - WIKA 821 Betriebsanleitung

1. General information

1. General information
The magnetic snap-action contact described in the operating
■
instructions has been designed and manufactured by state-of-the-
GB
art knowledge. All components are subject to stringent quality and
environmental criteria during production. Our management systems
are certified to ISO 9001 and ISO 14001.
These operating instructions contain important information on
■
handling the magnetic snap-action contact. Working safely requires
that all safety instructions and work instructions are observed.
Observe the relevant local accident prevention regulations and
■
general safety regulations for the magnetic snap-action's range of
use.
The operating instructions are part of the product and must be kept in
■
the immediate vicinity of the instruments with magnetic snap-action
contacts and readily accessible to qualified personnel at any time.
Skilled personnel must have carefully read and understood the
■
operating instructions prior to beginning any work.
The manufacturer's liability is void in the case of any damage caused
■
by using the product contrary to its intended use, non-compliance
with these operating instructions, assignment of insufficiently
qualified skilled personnel or unauthorised modifications to the
instrument.
The general terms and conditions, contained in the sales
■
documentation, shall apply.
Subject to technical modifications.
■
Further information:
■
- Internet address:
- Application consultant:
4
WIKA operating instructions magnetic snap-action contact model 821
www.wika.de / www.wika.com
Tel.: (+49) 9372/132-0
Fax: (+49) 9372/132-406
E-Mail: info@wika.de